How to wind a bobbin on a pfaff 7570

Hold the needle thread presser foot lifter (26). The built in dual teed IDT System PFAFF offers the ideal solution for sewing difficult materials: the built in dual feed. This system feed the material from the top and the bottom simultaneously just the same as by industrial sewing macl nes. Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on. Bobbins – How To Wind Them.

After winding a bobbin ZJ shows what a correctly wound bobbin should look like as well as what a poorly wound bobbin can look like. She also explains how the bobbin should feel and how a poorly wound bobbin can cause tension problems, bird’s nesting, thread breakage and poor stitch quality. Push the clip towards the left with your thumb, and the little pin will disengage. Then lift the lid off. Move the bobbin winder to the right.

Remove the two screws. The needle, bobbin case and bobbin must all turn and feed at exactly the same time and in the same motion or the machine will not work properly. The bobbin case is the round part that holds the bobbin in the bottom arm of the machine. Cleaning the bobbin case and adjusting the hook fixes any bobbin case issues. Step Open the shuttle cover.

The shuttle cover is located below the needle. It will look like a metal cylinder. Slide out the bobbin. Anita the clutch for the bobbin winder sounds like it is not disengaging.

If your bobbin is secured within the. Unless you are familar with machine repairs you might want to take it in. Just remove the needle while you wind the bobbin for now. : Troubleshooting Troubleshooting In this troubleshooting guide you will fi nd solutions to the problems you may have with your machine.

Drop the bobbin in and slip the thread into the slit. Skip navigation Sign in. I check that the bobbin winder is in the correct position to the left.

Machine light comes on but does not even make any sound. Make sure the thread is correctly threaded through the machine and needle as you would to sew. Follow the threading pattern in the video with the end of the thread pulled directly from tail coming. I love this machine, it has great stitches, and I love having so many needle positions. I have just finished a full bobbin of threa and the low bobbin indicator did not come on.

The protrusion will go into the square hole in the handwheel. Now position the white part so it rides on the outside of the black part. In rare cases, the bobbin can be at fault if it has not been threaded properly. If the thread is not smooth, is uneven, has knots, or is very loose on the bobbin , it has not been threaded correctly. Knowing how to wind a bobbin eliminates this risk.

Pfaff Ambition And Hobby.